重构代码为单个函数

bin/init.sh

@@ -1,9 +1,13 @@
 #!/bin/bash
 
-script_dir=$(cd "$(dirname "$0")"; pwd) # 脚本绝对路径
+init() {
+    local script_dir=$(cd "$(dirname "$0")"; pwd)
+    
+    # 更新密码
+    bash "$script_dir/update_password.sh"
+    
+    # 生成自签名证书和设置域名
+    bash "$script_dir/set_domain.sh" "bing.com"
+}
 
-# 更新密码
-bash "$script_dir/update_password.sh"
-
-# 生成自签名证书和设置域名
-bash "$script_dir/set_domain.sh" "bing.com"
+init

bin/print_share_link.sh

@@ -1,38 +1,43 @@
 #!/bin/bash
 
-script_dir=$(cd "$(dirname "$0")"; pwd) # 脚本所在目录
-config_dir=$(readlink -f "$script_dir/../") # 配置文件所在目录
-source "${script_dir}/utils/base.sh"
+print_share_link() {
+    local script_dir=$(cd "$(dirname "$0")"; pwd)
+    local config_dir=$(readlink -f "$script_dir/../")
+    source "${script_dir}/utils/base.sh"
+    
+    # 检查jq是否安装
+    check_jq
+    
+    # 检查是否已启动过容器
+    local password=$(jq -r '.auth.password' "$config_dir/config.json")
+    if [ "$password" = "你的密码" ]; then
+        red "error: 容器未启动过, 查看配置失败"
+        echo '请选择"启动容器"'
+        exit 1
+    fi
+    
+    # 读取配置文件内容
+    local config=$(cat "$config_dir/config.json")
+    
+    # 提取所需信息
+    password=$(echo "$config" | jq -r '.auth.password')
+    local sni=$(echo "$config" | jq -r '.masquerade.proxy.url' | awk -F'/' '{print $3}')
+    local ipv4=$(curl -4 -sSL --connect-timeout 3 --retry 2 ip.sb || echo "null")
+    local port=$(echo "$config" | jq -r '.listen' | cut -d':' -f2)
+    local obfs_password=$(echo "$config" | jq -r '.obfs.salamander.password')
+    
+    # 构建分享链接
+    local share_link="hysteria2://${password}@${ipv4}:${port}/?sni=${sni}&insecure=1#${ipv4}&obfs-password=${obfs_password}"
+    
+    # 输出分享链接
+    echo -e "\033[32m"
+    echo "IPV4: $ipv4"
+    echo "port: $port"
+    echo "password: $password"
+    echo "sni: $sni"
+    echo "混淆密码: $obfs_password"
+    echo "分享链接: $share_link"
+    echo -e "\033[0m"
+}
 
-# 检查jq是否安装
-check_jq
-
-# 检查是否已启动过容器
-password=$(jq -r '.auth.password' $config_dir/config.json)
-if [ "$password" = "你的密码" ]; then
-  red "error: 容器未启动过, 查看配置失败"
-  echo '请选择"启动容器"'
-  exit 1
-fi
-
-# 读取配置文件内容
-config=$(cat "${script_dir}/../config.json")
-# 提取所需信息
-password=$(echo "$config" | jq -r '.auth.password')
-sni=$(echo "$config" | jq -r '.masquerade.proxy.url' | awk -F'/' '{print $3}')
-ipv4=$(curl -4 -sSL --connect-timeout 3 --retry 2 ip.sb || echo "null") # 本机IPV4地址
-port=$(echo "$config" | jq -r '.listen' | cut -d':' -f2) # 端口号
-obfs_password=$(echo "$config" | jq -r '.obfs.salamander.password') # 混淆密码
-
-# 构建分享链接
-share_link="hysteria2://${password}@${ipv4}:${port}/?sni=${sni}&insecure=1#${ipv4}&obfs-password=${obfs_password}"
-
-# 输出分享链接
-echo -e "\033[32m"
-echo "IPV4: $ipv4"
-echo "port: $port"
-echo "password: $password"
-echo "sni: $sni"
-echo "混淆密码: $obfs_password"
-echo "分享链接: $share_link"
-echo -e "\033[0m"
+print_share_link # 输出分享链接

bin/update_port.sh

@@ -1,13 +1,18 @@
 #!/bin/bash
 
-script_dir=$(cd "$(dirname "$0")"; pwd) # 脚本文件绝对路径
-config_dir=$(readlink -f "$script_dir/../") # 配置文件绝对路径
-source $script_dir/utils/jq_util.sh
+# 修改端口的函数
+change_port() {
+    local script_dir=$(cd "$(dirname "$0")"; pwd)
+    local config_dir=$(readlink -f "$script_dir/../")
+    source "$script_dir/utils/jq_util.sh"
+    
+    local old_port=$(jq -r '.listen' "$config_dir/config.json" | awk -F : '{print $2}')
+    local port
+    read -p "请输入新的端口[当前端口: $old_port]: " port
+    
+    modify_json_file "$config_dir/config.json" ".listen" ":$port"
+    
+    echo "端口修改成功！新端口为: $port"
+}
 
-old_port=$(jq -r '.listen' "$config_dir/config.json" | awk -F : '{print $2}')
-read -p "请输入新的端口[当前端口: $old_port]: " port
-
-# 修改端口
-modify_json_file "$config_dir/config.json" ".listen" ":$port"
-
-echo "端口修改成功！新端口为: $port"
+change_port